Yamaha Arius YDP-160 소유자 매뉴얼 - 페이지 35

{카테고리_이름} Yamaha Arius YDP-160에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-160 44 페이지. Yamaha digital piano user's manual
Yamaha Arius YDP-160에 대해서도 마찬가지입니다: 미디 데이터 포맷 (6 페이지), 빠른 작동 매뉴얼 (2 페이지), 소유자 매뉴얼 (44 페이지), 매뉴얼 (44 페이지), (덴마크어) 사용자 가이드 (44 페이지)

페이지 인쇄

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor-

dance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the stand on the ﬂat ﬂoor surface.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready

Remove all parts from the package and make sure you

have all of the items.

Bundled pedal cord

inside

Assembly Parts

6 × 20 mm long screws × 4 1

6 × 16 mm short screws ×4 2

4 × 12 mm thin screws ×2 3

Headphone hanger set (YDP-160 only)

4 × 10 mm thin screws ×2 5

AC Power cord (YDP-160)

AC Power adaptor (YDP-140)

4 × 20 mm tapping screws × 4 4

Cord holders × 2

Headphone hanger

Attach (ﬁnger-tighten) C to D

and E.

1-1 Untie and straighten out the bundled pedal

cord. Don't discard the vinyl tie. You will

need it later in step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by ﬁnger-tightening the

long screws 1 (6 × 20mm).

1-2

1-3

YDP-160/140

Keyboard Stand Assembly

1-1

Owner's Manual