Yamaha Arius YDP-162 참조 - 페이지 2

{카테고리_이름} Yamaha Arius YDP-162에 대한 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Arius YDP-162 8 페이지. Quick operation guide
Yamaha Arius YDP-162에 대해서도 마찬가지입니다: 소유자 매뉴얼 (36 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

MIDI Functions

When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The

explanations here cover the settings necessary for performing MIDI communication between both devices.

For instructions on how to connect this instrument to the computer, refer to the "Computer-related Operations"

downloadable from the Yamaha Manual Library.

MIDI Transmit/Receive Channel Selection

In order to perform MIDI communication between this instrument and a computer, it is

necessary to match the corresponding MIDI transmit and receive channels. By setting the

MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance

or the program change can be transmitted over the channel number corresponding to a

specified channel on the computer. By properly setting the MIDI receive channels on this

instrument, only data of the specified channel will be played back in the MIDI data received

from the computer.

Setting the Transmit Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C1–E2 keys.

Setting the Receive Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4–F5 keys.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal

tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard

of the instrument does not play the internal voices.

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing the

C6 key repeatedly toggles between Local Control On and Off.

14 16

5 6 8 10 12 13 15 OFF

Transmit Channel

(C1–E2)

14 16

5 6 8 10 12 13 15 1+2 ALL

Receive Channel

(C4–F5)

MIDI transmission channels

in Dual

Voice 1 data is transmitted on

the channel set up here.

Voice 2 data is transmitted on

the next greater channel

number relative to the specified

channel.

MIDI receive channel = ALL:

This allows simultaneous

reception of different parts on

all 16 MIDI channels. When

SMF Song data is played back

on a computer with the Voice of

this instrument, this setting is

selected. However, when a

Voice not available on the

instrument is specified, the

playback sound may not be

suitable.

MIDI receive channel = 1+2:

This allows simultaneous

reception on channels 1 and 2

only. When SMF Song data is

played back on a computer,

this setting is selected for

playing back only data of

channels 1-2 on this instrument.

Panel settings (Voices, etc.) of

this instrument will not be

affected by MIDI messages

received from a computer.

Data for the demo song and

piano preset songs cannot be

transmitted via MIDI.

Default setting

YDP-162/142 MIDI Reference