Yamaha ARIUS YDP-S55 소유자 매뉴얼 - 페이지 38
{카테고리_이름} Yamaha ARIUS YDP-S55에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha ARIUS YDP-S55 48 페이지.
Yamaha ARIUS YDP-S55에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지), 미디 레퍼런스 (4 페이지)
페이지 인쇄
Keyboard Stand Assembly
2-4
Re-tighten the screws on the upper side of
the back board that were temporarily
fastened in step 2-1.
Side
board (R)
Anti-fall
bracket (R)
2-3
× 2
× 4
Secure the anti-fall brackets using the screws.
CAUTION
Be sure to attach the anti-fall brackets. Failure to do so
might result in damage to the instrument or even
injury.
3.
Secure the pedal box.
3-1
Securely tighten the screws on the pedal
box that were attached in step 1.
3-2
Attach the caps to the screw heads.
Side board (L)
Pedal box
38
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual
2-1, 2-4
× 2
Thin screws
(4 × 12 mm)
Back board
Tapping screws
(4 × 20 mm)
Anti-fall
bracket (L)
2-2
Long screws (6 × 25 mm)
3-2
× 2
Caps
Side board (R)
Back board
3-1
4.
Set the main unit in place.
Be sure to hold the bottom surface 10 cm or more
inside from the edge of the main unit so that you
do not pinch your hands.
Side
board (L)
At least
10 cm
CAUTION
• Be careful not to pinch your hands or drop the main
unit.
• Do not hold anywhere other than the specified
position.
5.
Secure the main unit by tightening
the thick screws (6 × 16 mm).
Side
board (L)
Main unit
Back board
Align the dowels on the upper
part of the side boards with
the corresponding holes on
the bottom of the main unit.
Main unit
Back board
Side
board (R)
Thick screws
(6 × 16 mm)
× 4
At least
10 cm