Yamaha AvantGard N2 유지 관리 핸드북 - 페이지 25

{카테고리_이름} Yamaha AvantGard N2에 대한 유지 관리 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AvantGard N2 45 페이지. Hybrid piano

4. Key Block

Remove the two left/right screws [S2EB], and remove the key block.

[S2EB]

KEY BLOCK L

5. Front Rail

Remove the two left/right screws [S2ED] (2 each), and remove the key slip.

* Tighten the screws in the numerical order of q and w in the ﬁ gure during installation of the front rail assembly.

[S2ED]

6. Action

* Change the step sequence in No. 6 through No. 9 according to the task contents.

6-1

Remove the two (2) screws marked [591].

6-2

Remove the eight action bracket installation screws, and then remove the action while gripping

the shank stopper lower sound part and the shank rail next high sound side as shown in the

photo (right).

* We recommend you use a screwdriver with long shaft to remove the screws

for the action bracket.

[591]

FRONT RAIL

[S2EB]

KEY BLOCK R

[S2ED]

[591]