Yamaha AvantGrand N1 소유자 매뉴얼 - 페이지 23

{카테고리_이름} Yamaha AvantGrand N1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AvantGrand N1 50 페이지.

페이지 인쇄

Recording your Performance

This instrument's recording function enables you to record your performance. Follow the steps below to record and

play back your performance.

Audio recording and data recording

Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the

other hand, this instrument records information about the notes and voices being played and about the timing and

tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instru-

ment, its internal tone generator reproduces the sound according to the recorded information.

Select a voice for the recording.

While holding down the [PIANO/VOICE] button, press the [+] or [-] button to

select the desired voice (page 15). Use the [MASTER VOLUME] control to

adjust the volume to a comfortable listening level.

Engage the Record mode.

Press the [RECORD] button.



The [RECORD] button indicator lights up steadily, and the [PLAY/STOP] but-

ton indicator flashes.

Lights up

Press the [RECORD] button again if you wish to cancel Record mode.

NOTICE

After you've recorded a performance on this instrument, starting to record another perfor-

mance will automatically erase the previously recorded data.

3, 4, 5

Flashes

You can also use the [MASTER VOLUME]

control to adjust the volume level during

playback.

You cannot engage the Record mode while

another song, such as a demo song, is

playing.

This instrument's internal memory allows

the recording of one song (300KB; approx.

3,000 notes).

The recorded song data is retained even

when the power is turned off.

The recorded song to the instrument can be

saved to USB flash memory (page 25).

When a USB flash memory device is con-

nected to the instrument, the performance

is recorded to the USB flash memory

directly.

If there is not enough recording capacity

left, or if the files U00–U99 already exist in

FUL

the USB flash memory, "

" will appear

on the display and the Record mode cannot

be engaged.

Before using a USB flash memory device,

be sure to read "Precautions when using

the USB [TO DEVICE] terminal" on page 26.

• 23

Owner's Manual