Yamaha AW16G Recording 101 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Yamaha AW16G Recording 101에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AW16G Recording 101 27 페이지. Professional audio workstation

Before you begin recording it is necessary to connect the AW16G with the

equipment that it is to be used with.

Step 1: Connect the Monitoring System

If powered monitors are to be used with the AW16G, connect the Monitor

Outs of the AW16G to the inputs of the monitors using unbalanced instrument

cable. The monitor outputs of the AW16G are unbalanced 1/ 4-inch jacks so it is

not necessary to use balanced cable.

AW16G to powered monitors.

If unpowered monitors are to be used with the AW16G, first connect the

Monitor Outs of the AW16G to the inputs of the power amp using unbalanced

instrument cable. Next, connect the speaker outputs of the power amp to the

inputs of the unpowered monitors using speaker cable. For best results 10-16

gauge speaker cable should be used to connect the power amp to the monitors.

The lower the gauge of speaker cable, the better the sound quality will be. For

shorter distances (less than 10-20 ft.), this will be less noticeable but it is still

important to use lower gauge quality speaker cables.

to connect the AW16G to the power amp.

Do not use speaker cable to connect the

With Powered Monitors

Do not use speaker cable