Yamaha AW2400 매뉴얼 - 페이지 5

{카테고리_이름} Yamaha AW2400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AW2400 30 페이지. Professional audio workstation
Yamaha AW2400에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지)

페이지 인쇄

Setting up the AW2400

Before you begin recording it is necessary to connect the AW2400 with

the equipment that it is to be used with.

Step 1: Connect the Monitoring System

If powered monitors are to be used with the AW2400, connect the Monitor

Outs of the AW2400 to the inputs of the monitors using balanced instrument

cable. The monitor outputs of the AW2400 are balanced 1/ 4-inch jacks so it is

not recommended to use unbalanced cable.

Do not use speaker cable to connect the AW2400 to powered monitors.

If un-powered monitors are to be used with the AW2400, first connect the

Monitor Outs of the AW2400 to the inputs of the power amp using balanced

instrument cable. Next, connect the speaker outputs of the power amp to the

inputs of the un-powered monitors using speaker cable. For best results 10-16

gauge speaker cable should be used to connect the power amp to the monitors.

The lower the gauge of speaker cable, the better the sound quality will be. For

shorter distances (less than 10-20 ft.), this will be less noticeable but it is still

important to use lower gauge quality speaker cables.

With Powered Monitors