Yamaha AW2816 매뉴얼 - 페이지 31
{카테고리_이름} Yamaha AW2816에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AW2816 32 페이지. Professional audio workstation, recording101
Yamaha AW2816에 대해서도 마찬가지입니다: 운영 매뉴얼 (2 페이지), 업데이트 매뉴얼 (2 페이지), 튜토리얼 (31 페이지)
페이지 인쇄
Channel.
Routing a Monitor / Playback Channel to an Internal Effects Processor
Any or all Tracks can be routed through the two Effects Processors in the AW2816. Since all Tracks
''share'' the two Effects Processors, it is not possible to have each Track routed to a different, or
dedicated, Effect simultaneously.
1) Press the [RECORDER 1-8] or [RECORDER 9-16] key in the 'MIXING LAYER' section, to select
the desired Mixing Layer for the playback channels.
2) Press the [AUX 5] (EFF1) or [AUX 6] (EFF2) button in the 'MIXER' section, and raise the faders of
any channels that are to be sent to the effects processor.
NOTE: The higher a Track fader is raised, the greater the amount the Track will be ''effected''.
3) Press the [HOME] button in the 'MIXER' section.
4) Adjust the Effects Return levels with the Blue RTN 1 and RTN 2 knobs as desired.
Routing an Input Channel to an Internal Effects Processor
Any or all Tracks can be routed through the two Effects Processors in the AW2816. Since all Tracks
''share'' the two Effects Processors, it is not possible to have each Track routed to a different, or
dedicated, Effect simultaneously.
For routing an input channel to effects unit 1
1) Press the [1-8] 'INPUT' key in the 'MIXING LAYER' section.
2) Press the [AUX 5] (EFF1) or [AUX 6] (EFF2) key in the 'MIXER' section, and raise the faders of any
input channels that are to be sent to the effects processors.
NOTE: The higher a Track fader is raised, the greater the amount the Track will be ''effected''.
3) Press the [HOME] button.
28