Yamaha AW4416 매뉴얼 보충 자료 - 페이지 6
{카테고리_이름} Yamaha AW4416에 대한 매뉴얼 보충 자료을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha AW4416 48 페이지. Installing an internal hard disk
Yamaha AW4416에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 튜토리얼 (34 페이지), 보충 설명서 (20 페이지), 매뉴얼 (3 페이지)
페이지 인쇄
AW4416 Version 2.0 Manual Supplement
Added/modified MIDI functions
MIDI-related functionality has been significantly
enhanced in version 2.0. The following functions and
specifications have been added or modified.
The various items in the previous MIDI Setup page
and MIDI Sync page have been reorganized into
the MIDI Setup 1 page and MIDI Setup 2 page.
You can now use control changes or parameter
changes to operate the parameters of the AW4416
from an external MIDI device.
Internal AW4416 settings can now be output via
MIDI.
A "MIDI Remote" function has been added, allow-
ing you to use faders 1–16 and [ON] keys 1–16 to
control external MIDI devices.
As an MTC output destination, you can now select
MIDI/TO HOST/OPTION (option slot 2) in addition
to the previous choice of the MTC OUT connector.
MTC is now transmitted from the MTC OUT con-
nector at all times.
As the port used to transmit/receive MIDI mes-
sages, you can now select OPTION (option slot 2)
in addition to the previous choices of MIDI/TO
HOST. This setting will be valid when a I/O card
able to transmit/receive MIDI messages (such as the
mLAN card "MY8-mLAN" expected to go on sale
soon) is installed in option slot 2.
The additions and changes for each item are
explained below.
Changes in the MIDI Setup page/
MIDI Sync page
The various items in the previous MIDI Setup page
and MIDI Sync page have been reorganized into the
MIDI Setup 1 page and MIDI Setup 2 page. The con-
tent of the new pages is as follows.
MIDI Setup 1 page
Here you can select the MIDI transmit/receive chan-
nels, turn transmission and reception of various MIDI
messages on/off, and make settings related to MIDI
synchronization.
6
1
2
3
4
5
6
A
PROGRAM CHANGE
Here you can make settings for program change
message transmission/reception. Each button has
the following function.
TX
If this button is on, the program change number
assigned to a scene will be transmitted when that
scene is recalled.
RX
If this button is on, a scene will be recalled when
the program change number assigned to that
scene is received.
OMNI
If this button is on, program changes of all MIDI
channels will be received regardless of the Rx
CH (Receive MIDI channel) setting (8).
ECHO
If this button is on, received program changes
will be "thru-ed" (retransmitted) without change
from the MIDI OUT connector/TO HOST con-
nector.
B
CONTROL CHANGE
Here you can make settings for control change
message transmission/reception. Each button has
the following function.
TX
If this button is on, operating a parameter of the
AW4416 will cause the control change assigned
to that parameter in the CTL Asgn. page to be
transmitted.
RX
If this button is on, receiving a control change
will cause the AW4416 parameter assigned to
that control change in the CTL Asgn. page to
change.
OMNI
If this button is on, control changes of all MIDI
channels will be received regardless of the Rx
CH (Receive MIDI channel) setting (8).
Version 2.0 Manual Supplement
7
8
9
K
J