Yamaha CH-500 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha CH-500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha CH-500 6 페이지. Chimes; chimes stand
Yamaha CH-500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (7 페이지)

CH-500/CHS-520

Insert the side columns into the base. At this

time, make sure that the damper rest, at-

tached at the center of the column, and the

short section of the column is positioned up-

right.

Side Column

Damper Rest

Fit the damper onto the side columns and

lower the damper onto the damper rest. Next,

secure the damper in its position with the

damper fixing bolts. At this time, tighten the

fixing bolts that secure the side column to the

base as well.

Damper

Damper Stay

ASSEMBLY PROCEDURE

Short Section

Long Section

Base

Fixing Bolt

Side Column

Damper Rest

Remove the damper stay, attached to the

bottom of the damper, loosen the wing bolt

on the damper stay, and attach the stay to

the pedal hook. The pedal's position can

be controlled by adjusting the length of the

pedal stay with its two wing bolts. At this time,

tighten the upper wing bolt first, then go on to

tighten the lower bolt.

Adjust the pedal position so that the pedal

stops slightly above the floor when fully de-

pressed.

Damper Stay

Pedal Hook

Slide the hanger onto the side columns.

To activate the damper stopper, depress the

pedal and press the stopper. When the pedal

is released, the stopper will hold the damper

in place.

Base

Hanger

Side Column

Damper Stopper

Side Column