Yamaha Clavinova CLP-115 소유자 매뉴얼 - 페이지 30

{카테고리_이름} Yamaha Clavinova CLP-115에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-115 46 페이지. Yamaha keyboard user manual
Yamaha Clavinova CLP-115에 대해서도 마찬가지입니다: 빠른 작동 매뉴얼 (2 페이지), 소유자 매뉴얼 (46 페이지), 사용자 설명서 (35 페이지)

페이지 인쇄

Mount the main unit.

CAUTION

• Fingers can become pinched between the main

unit and the rear or side panels, be extra careful

so as not to drop the main unit.

• Do not hold the keyboard in any position other

than the position shown in the illustration.

Be sure to place your hands at least 10 cm

from either end of the main unit when positioning it.

At least

10 cm

Fix the main unit.

(1) Center the main unit to pro-

duce equal clearance on

the left and right sides.

Keyboard Stand Assembly

CLP-115

(2) Use 6x16 mm short screws

2 to secure the main unit

from the front.

Connect the pedal cord.

(3) Use a twist tie to

take up any slack

in the pedal cord.

(2) Attach the cord holders to

the rear panel as shown,

then clip the cord into the

holders.

Set the voltage selector and connect the

power cord.

127

240

Voltage Selector

Before connecting the AC power cord, check the setting

of the voltage selector which is provided in some areas.

To set the selector for 110V, 127V, 220V or 240V main

voltages, use a "minus" screwdriver to rotate the selector

dial so that the correct voltage for your region appears

next to the pointer on the panel. The voltage selector is

set at 240V when the unit is initially shipped. After the

proper voltage has been selected, connect the AC power

cord to the AC INLET and an AC wall outlet. A plug

adaptor may be also provided in some areas to match the

pin conﬁguration of the AC wall outlets in your area.

(1) Insert the pedal cord

plug to the pedal con-

nector from the rear.