Yamaha Clavinova CLP-123 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Yamaha Clavinova CLP-123에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-123 30 페이지. Yamaha clavinova instrument owner's manual

페이지 인쇄

MIDI Functions

The MIDI Split & Left Local OFF Mode

In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal

way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha

DOM-30 Disk Orchestra Module. In this mode the right-hand section of the keyboard is used to play an internal

Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.

Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the

key that divides the left- and right-hand sections of the keyboard can be set at any desired key.

OPTIONAL IN

MIDI OUT

Clavinova

VINOVA

E. PIANO

ONE

MIDI/

TRANSPOSE

SPLIT POINT

Left-hand section plays

Right-hand section plays a

a DOM-30 bass voice.

Clavinova piano voice.

The MIDI Split & Right Local Off Mode

In the CLP-123 either the right- or left-hand section of the keyboard can be assigned to control an external

keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in

the previous section. To assign the right-hand section to external tone generator control while playing the

Clavinova voices with the left hand, press the [VIBES] voice selector instead of the [HARPSICHORD] voice

selector when activating the Split mode (see the preceding section). All other operations are exactly the same as

described in the previous section.

Transmitting the Panel Settings

This function causes all the current Clavinova control settings (selected voice, etc.) to be transmitted via the

MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-

corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings

and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be

automatically restored to the same settings when the performance is played back.

MIDI/

TRANSPOSE

(Clavinova) voice with the right hand while playing a synthesizer bass line

LINE OUT

MIDI

or string section with the left hand.

DOM-30

section are transmitted via the Clavinova MIDI OUT connector on MIDI

channel 2. Notes played on the right-hand section are transmitted on the

(Set to receive on

"basic channel" (i.e. the channel set using the MIDI channel selection func-

MIDI channel 2)

tion described previously).

HARPSI-

CHORD

VIBES

STRINGS

ORGAN

The MIDI split mode is useful if, for example, you want to play a piano

When the MIDI split mode is activated, notes played on the left-hand

Press the [HARPSICHORD] voice selector while holding down the

[MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash.

While still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The HARPSI-

CHORD LED will light continuously. The split-point becomes the first

key of the left-hand section.

Release the [MIDI/TRANSPOSE] button.

To return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [HARPSICHORD] voice selector, then

release both buttons.

Note: When the power is turned ON the default split point key — F # 2 — will be

automatically selected. If a new split point is selected it remains active until the

power is turned OFF or a different split point is selected.

Hold down the [MIDI/TRANSPOSE] button.

Press the [STRINGS] voice selector.

Release the [MIDI/TRANSPOSE] button.