Yamaha Clavinova CLP-134 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Yamaha Clavinova CLP-134에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-134 39 페이지. Clavinova
Yamaha Clavinova CLP-134에 대해서도 마찬가지입니다: 소유자 매뉴얼 (39 페이지), 소유자 매뉴얼 (39 페이지)

페이지 인쇄

MIDI Functions

Other MIDI Functions

The MIDI functions listed to the right are engaged by

holding down the [MIDI/TRANSPOSE] button and press-

in the following pages.

MIDI FUNCTION CHART

ing the corresponding voice selector. Full details are given

Function

CLP-134 Volca:Selector

Local Control ON/OFF

[PIANO 1]

Program Change ON/OFF

[PIANO 2]

Control Change ON/OFF

[PIANO 3]

Multi-Timbre Mode

[CLAVINOVA TONE]

MIDI Split & Left Local OFF

[EPIANO 1]

—

MIDI Split & Right Local OFF | [E.PIANO 2]

Panel Data Transmit

[HARPSICHORD]

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since

the internal tone generator is controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices,

but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on

the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI

IN connector.

When using the DOM-30 Disk Orchestra Module with the Clavinova, for example, Local Control should be

turned OFF when recording using the DOM-30 voices only, and ON when recording the Clavinova voices while

listening to playback of the DOM-30 voices.

MDV

۸۸0

TRANSPOSE

iN č

PIANO = Local Control OFF

Hold down the [MIDI/TRANSPOSE] button.

Press the [PIANO 1] voice selector. If the PIANO 1 LED is lit when

the [PIANO 1] voice selector is pressed, you have turned local control

OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector

is pressed, you have turned local control ON.

Release the [MIDI/TRANSPOSE] button.

ne = Local Control ON

@ Program Change ON/OFF

Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard

or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova

will normally also send a MIDI program change number whenever one of its voices is selected, causing the cor-

respondingly numbered voice or program to be selected on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program change number reception and transmission so that voices

can be selected on the Clavinova without affecting the external MIDI device, and vice versa.

Hold down the [MIDI/TRANSPOSE] button.

MIDI.

TRANSPOSE

sé |

Jet

PIANO = Program Change OFF

‫م‬

‫ا‬

‫ق‬

‫م‬

Press the [PIANO 2] voice selector. If the PIANO 2 LED is lit when

the [PIANO 2] voice selector is pressed, you have turned program

change reception/transmission OFF. If the PIANO 2 LED is not lit

when the [PIANO 2] voice selector is pressed, you have turned pro-

gram change reception/transmission ON.

PÁNO = Program Change ON

Release the [MIDI/ TRANSPOSE] button.