Yamaha Clavinova CLP-320 소유자 매뉴얼 - 페이지 29

{카테고리_이름} Yamaha Clavinova CLP-320에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-320 44 페이지. Quick operation guide
Yamaha Clavinova CLP-320에 대해서도 마찬가지입니다: 데이터 목록 (6 페이지), 빠른 작동 매뉴얼 (2 페이지)

페이지 인쇄

MIDI Functions

You can make detailed adjustments to MIDI settings.

MIDI Transmit/Receive Channel Selection

In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-

ment must be matched for proper data transfer.

This parameter enables you to specify the channel on which the instrument transmits

or receives MIDI data.

Procedure

Setting the transmit channel

While holding down the

[DEMO/SONG]

press one of the C1–E2 keys.

Setting the receive channel

While holding down the

[DEMO/SONG]

press one of the C4–F5 keys.

2 4

1 3 5 6 8 10

transmit channels.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the keyboard of this instrument con-

trols its internal tone generator, allowing the internal voices to be played directly from

the keyboard. This situation is "Local Control On," since the internal tone generator is

controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the keyboard of this instrument does

not play the internal voices, but the appropriate MIDI information is still transmitted

via the MIDI OUT connector when notes are played on the keyboard. At the same

time, the internal tone generator responds to MIDI information received via the MIDI

IN connector.

Procedure

While holding down the

[DEMO/SONG]

press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and

Off.

and

[PIANO/VOICE]

and

[PIANO/VOICE]

D 2

7 9 11

14 16

12 13 15

1 3 5 6 8 10

For setting the

(C1–D 2)

OFF

and

[PIANO/VOICE]

buttons simultaneously,

2 4

7 9 11

14 16

12 13 15 1+2

For setting the

receive channels.

(C4–F5)

ALL

buttons simultaneously,

The highest key

MIDI Functions

In Dual mode, Voice 1 data is

transmitted on its speciﬁed

channel and Voice 2 data is

transmitted on the next greater

channel number relative to the

speciﬁed channel. In this mode,

no data is transmitted if the

transmit channel is set to "OFF."

MIDI receive channel is ALL:

A "Multi-timbre" Receive mode

is available. In this mode, this

instrument receives different

parts from the connected MIDI

device on any or all 16 MIDI

channels and plays multi-chan-

nel song data.

MIDI receive channel is 1+2:

A "1+2" Receive mode is avail-

able. It allows simultaneous

reception on channels 1 and 2

only, enabling this instrument to

play 1 and 2 channel song data

received from a music computer

or sequencer.

Program change and other like

channel messages received will

not affect this instrument's

panel settings or the notes you

play on the keyboard.

Data for the demo song and 50

piano preset songs cannot be

transmitted via MIDI.

CAUTION

When Local control is turned

OFF, the keyboard of this instru-

ment does not play the internal

voices.

Owner's Manual

CLP-320