Yamaha CLAVINOVA CLP-665GP 펌웨어 업데이트 매뉴얼 - 페이지 2

{카테고리_이름} Yamaha CLAVINOVA CLP-665GP에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha CLAVINOVA CLP-665GP 5 페이지.



Updating the Firmware

Notice: The following must be observed during the firmware update



Do not turn off the instrument during the update.



Do not remove the USB flash drive from the instrument.

When you run into a trouble during the firmware update, refer to the

section located at the end of this document.

1. Make sure that the instrument is turned off before updating the firmware.

2. Insert the USB flash drive with the copied firmware into the USB [TO DEVICE] terminal.

3. Press and hold the [▶/ll] (PLAY/PAUSE) button, and turn on the instrument.

Keep the [▶/ll] button held down until the display shows the following message.

The red marking below shows where the [▶/ll] button is located on the panel.

4. Press the [▶/ll] button again when the display shows the following message.

Troubleshooting