Yamaha Clavinova CLP-725 소유자 매뉴얼 - 페이지 30

{카테고리_이름} Yamaha Clavinova CLP-725에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-725 40 페이지.

페이지 인쇄

Appendix

Troubleshooting

Problem

Power suddenly and unexpectedly

turns off.

The instrument does not turn on.

A click or pop is heard when the

power is turned on or off.

Noise is heard from the speakers

or headphones.

Metronome or Song goes out of

tempo slightly when you play the

keyboard.

The overall volume is low, or no

sound is heard.

Pedals do not function.

The damper pedal does not

function as expected.

Glossary of Terms

VRM (Virtual Resonance Modeling)

On an actual acoustic piano, if you press the damper pedal and play a key, not only does the string of the pressed key vibrate, it

also causes other strings and the soundboard to vibrate, with each influencing the rest, creating a rich and brilliant resonance that

sustains and expands. The VRM technology featured in this instrument reproduces the complicated interaction between both

string and soundboard resonance, and make the sound more like that of a real acoustic piano. Since resonance instantaneously

occurs depending on the action of the keys and pedal, you can expressively vary the sound by changing the timing of your

pressing the keys, and the timing and depth of your pressing the pedal.

Grand Expression Modeling

On an actual acoustic piano, subtle changes in the sound can be produced by changing your playing touch from when you press

a key to when you release it. For example, when you press a key all the way to its bottom, the key hits the keybed underneath and

the noise reaches the strings, changing the sound slightly. Furthermore, the tone when the damper is lowered onto strings to mute

the sound is changed by how quickly you release the key. The Grand Expression Modeling technology recreates these subtle

changes in the sound that respond to your touch. This allows you to add accents by playing strongly or add resonance by playing

softly to produce superbly expressive sound. A crisp tone can be heard when playing staccato as well as a lingering sound

produced when releasing the keys slowly.

CLP-725 Owner's Manual

Possible Cause and Solution

This is normal and the Auto Power Off function may have been activated (page 12).

If desired, disable the Auto Power Off function.

The plugs are not properly connected. Make sure that the DC plug is securely inserted

into the DC IN jack on the instrument, and that the AC plug is securely inserted to the AC

outlet (page 12).

This is normal when electrical current is being applied to the instrument.

The noise may be due to interference caused by the use of a mobile phone in close

proximity to this instrument. Turn off the mobile phone, or move it further away from this

instrument.

This occurs infrequently when Grand Expression Modeling is set to "Dynamic." If this

happens, set Grand Expression Modeling to "Static" (page 15).

The Master Volume is set too low. Set it to an appropriate level using the [MASTER

VOLUME] knob (page 10).

Make sure a pair of headphones or conversion adaptor is not connected to the

[PHONES] jack (page 13).

The Speaker setting is "Off." Set the Speaker to "Normal" or "On" (page 13).

Make sure that Local Control is On. For details, refer to the "MIDI Reference" (page 9).

The pedal cord may not be securely connected to the [TO PEDAL] jack. Be sure to

insert the pedal cord all the way until the metal part of the cord plug disappears from

view (page 32).

The damper pedal was pressed when the power was turned on. This is not a

malfunction; release the pedal and press it again to reset the function.