Yamaha Clavinova CLP-810S 소유자 매뉴얼 - 페이지 21

{카테고리_이름} Yamaha Clavinova CLP-810S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CLP-810S 28 페이지. Yamaha clavinova clp-810s owner's manual
Yamaha Clavinova CLP-810S에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (28 페이지), 소유자 매뉴얼 (28 페이지)

페이지 인쇄

Be sure to place your hands at

least 10 centimeters from either

end of the main unit when posi-

tioning it.

10 cm

6 x 16 mm flat-head screws

Install the main unit (A).

Place the main unit (A) on the side panels (D) with the screws

on its bottom panel (toward the rear of the main unit) just behind

the grooves in the brackets located at the top of the side panels.

Then slide the main unit forward until it stops. WATCH YOUR

FINGERS WHEN DOING THIS!!

Align the holes on the bottom panel of the main unit with the

holes in the brackets on the side panels (also center the main unit

to produce equal clearance on the left and right sides, as shown in

the illustration), then use the four 6 x 16 millimeter flat-head

screws 3 to attach the main unit. Two screws can be attached

from the front side and two screws from the rear.

• Do not hold the keyboard in any position other than the position

shown in the above illustration.

• Fingers can become pinched between the main unit and the side

panels, be extra careful so as not to drop the main unit.

10 cm

CLP-810S