Yamaha Clavinova CVP-407 설치 절차 - 페이지 2
{카테고리_이름} Yamaha Clavinova CVP-407에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Clavinova CVP-407 2 페이지.
페이지 인쇄
5
Deleting the upgrade data
Press the
[BREAK] button
Press
[START/STOP] button
the upgrade data from the USB device.
Confirming the version number
Turn on the power of the instrument normally and wait until the main display appears.
1)
Press the [FUNCTION] button, then select [UTILITY] –>
[OWNER] tab.
Press the [7 ▲ ▼] / [8 ▲ ▼] (VERSION) buttons in the
2)
display.
3)
Check that the version number is correct for the
upgrade, and turn off the power of the instrument.
Troubleshooting
The power supply was cut off or the USB device was removed during installation.
A complete reinstall is necessary. Perform the installation operation again from the beginning.
The installation cannot be executed and an error message appears in the display.
Check the following:
✓
Is the USB device inserted correctly?
✓
Is the USB connector free from dust and dirt?
✓
Is the USB memory or the firmware data itself damaged in some way?
Try installing it again by using another USB device.
to call up the following display.
to start deleting
When the deletion of the upgrade data is
completed, the following display appears.
The upgrade data has been deleted from the
USB device. Turn off the power switch of the
instrument and remove USB device.