Yamaha disklavier DKC-850 인터넷 연결 매뉴얼
{카테고리_이름} Yamaha disklavier DKC-850에 대한 인터넷 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha disklavier DKC-850 2 페이지. Internet connection guide
Yamaha disklavier DKC-850에 대해서도 마찬가지입니다: 데이터 목록 (16 페이지), 기능 설명서 (13 페이지), 업데이트 매뉴얼 (5 페이지), 업데이트 매뉴얼 (45 페이지), 빠른 시작 매뉴얼 (2 페이지), 연결 매뉴얼 (6 페이지), 사용자 설명서 (22 페이지)
페이지 인쇄
6/4/2011
Online Services
DKC-850 INTERNET CONNECTION GUIDE
Connection Example
Wireless connection
*He re , "m ode m " re fe rs to an ADSL m o de m , optica l ne twork unit (O NU),
or cable m ode m .
Instructions
PURCHASE A
COMPATIBLE LAN
BRIDGE DEVICE
CONFIGURE THE
BRIDGE ADAPTER
ATTACH
ETHERNET CABLE
To your Disklavier
PRESS
Still can't connect? Follow these instructions...
...yamaha.com/connect/wirelessType?t...
Yamaha: Connect to Radio Service For ...
*Modem
Access point
Wireless bridge device
Ethernet cable
Any LAN bridge compatible with your network should allow you to
connect your instrument wirelessly. However, the following devices
have been fully tested and are recommended for use with Yamaha
instruments:
LINKSYS WET610N
BUFFALO WLI-TX4-AG300N
You may need to refer to the manufacturer's instructions to
configure your adapter. A full list of compatible adapters is available
at the
Yamaha Download
Set up your adapter to connect to your wireless network, following
the directions provided for your adapter. If you have any problems
connecting the bridge device to your network, please contact the
device manufacturer for further support.
Attach one end of an Ethernet cable to the rear port of the bridge
adapter and the other end to the Ethernet port on your Disklavier.
Press the [Internet] button on your remote. Congratulations, you
are now connnected. You should see the Internet Direct Connection
home page.
Site.
1/2