Yamaha disklavier Mark III Series 운영 매뉴얼 - 페이지 13
{카테고리_이름} Yamaha disklavier Mark III Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha disklavier Mark III Series 49 페이지. Playback models
Yamaha disklavier Mark III Series에 대해서도 마찬가지입니다: 유지 관리 핸드북 (50 페이지), 브로셔 및 사양 (20 페이지), 고급 운영 매뉴얼 (39 페이지)
페이지 인쇄
Chapter 1
Setting Up Your Disklavier
This chapter provides information on the supplied items and how to set up your Disklavier.
Items Supplied with
the Disklavier
Check that the following items are supplied with
your Disklavier:
• 1 Remote Control
• 2 Batteries for the Remote Control
• 2 Disklavier Sample PianoSoft Disks
• 1 Blank 3.5" 2HD Floppy Disk
• 1 Operation Manual
• 1 Control Unit Suspension Bracket
• 1 Stereo Headphones (DGP1 only)
Connecting the Control
Unit
Make sure that the control cable extending from
the piano is firmly connected to the TO
CONTROL CABLE FOR PIANO connector on
the rear panel of the Control Unit.
Note: The control cable should be connected to the
Control Unit when the Disklavier is installed.
If, however, it is not, carefully connect the
control cable to the Control Unit's TO
CONTROL CABLE FOR PIANO connector
on the rear panel. See step (4) in "Mounting
the Control Unit to the Grand Piano" at the
beginning of this manual.
It is recommended to mount the Control Unit to
the underside of the treble side key bed. See
"Mounting the Control Unit to the Grand Piano"
at the beginning of this manual.
1