Yamaha disklavier Mark III Series 운영 매뉴얼 - 페이지 39
{카테고리_이름} Yamaha disklavier Mark III Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha disklavier Mark III Series 49 페이지. Playback models
Yamaha disklavier Mark III Series에 대해서도 마찬가지입니다: 유지 관리 핸드북 (50 페이지), 브로셔 및 사양 (20 페이지), 고급 운영 매뉴얼 (39 페이지)
페이지 인쇄
Changing the
Polyphony Setting
Polyphony refers to the number of notes that can
be sounded simultaneously.
The Disklavier is set to 32-note stereo sampling
polyphony by default. In other words, it plays up
to 32 notes at a time (including sustained notes) in
stereo.
However, in special cases such as when playing
back a complex song with frequent pedal use, you
can adjust the polyphony setting to 64-note stereo
polyphony as described below.
Note: When complex songs with frequent pedal use
are played back in 32-note stereo sampling
polyphony, the number of notes beyond 32 are
lost, although these notes are minor notes that
are barely audible.
1
Press [FUNC.].
FUNC.
The FUNC. indicator lights and the
Function menu appears.
2
Press [>] until the c cursor is next
to the Silent option, then press
[ENTER].
The Silent menu appears.
3
ENTER
Press [>] until the c cursor is next
the Poly parameter, then use the
[–/NO] and [+/YES] buttons to
select the number of polyphonic
notes: 32 or 64.
Note: This setting is saved when the
Disklavier is turned off.
☛ Polyphony can be set along with reverb
settings and the setting for canceling
keyboard movement. See "Applying Reverb
Effects" on page 25, and "Canceling
Keyboard Movement" on page 26.
–/NO
+/YES
27