Yamaha Disklavier Silent MarkIII DC3A 유지 관리 핸드북 - 페이지 19

{카테고리_이름} Yamaha Disklavier Silent MarkIII DC3A에 대한 유지 관리 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Disklavier Silent MarkIII DC3A 50 페이지.

MOUNTING THE SPEAKERS AND ATTACHING THE CABLES

Mount the speakers in the correct orientation, as indicated below. The R speaker goes on the piano's

treble side; the L speaker goes on the bass side.

R (treble side)

L (bass side)

1. Make sure that the piano's power is switched off.

2. Mount speakers to the struts (back post or inner rim) using the included screws. Attach at the loca-

tions indicated in the diagrams on page 3.

Use 3 screws for each speaker.

The nuts are embedded in the struts.

Position so that the sound-output side of each speaker will face down after the piano is turned

upright.

3. Connect each connector to the corresponding cable from the Ampliﬁer Unit.

Connectors attach in one direction only.

Although the R speaker has 4 pins, only 2 of the pins are used.

4. Collect slack cable and bundle into the cable holder(s) mounted on the piano's strut(s).

Shape

Weight

R/L identical

4.2 kg.

R/L identical

4.2 kg.

Wire Colors

Connector

Red and black

White and black

4-pin

2-pin