Yamaha DTX Drums DTX502 참조 매뉴얼 - 페이지 12

{카테고리_이름} Yamaha DTX Drums DTX502에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DTX Drums DTX502 14 페이지. Dtx drums drum trigger
Yamaha DTX Drums DTX502에 대해서도 마찬가지입니다: 펌웨어 업데이트 매뉴얼 (4 페이지)

페이지 인쇄

MIDI Reference Material

MIDI Data Format

1. General

1.1 Scope

The specifications described herein apply to transmission and recep-

tion of MIDI data by a DTX502 drum trigger module.

1.2 Compliance

The specifications described herein comply with the MIDI 1.0 stan-

dard.

1.3 Legend

The following symbol has a special meaning herein.

• $: Placed in front of hexadecimal numbers.

2. Channel Messages

2.1 Key On & Key Off

Key On and Key Off messages are transmitted and received.

Range of notes received: 0 (C-2) to 127 (G8)

Velocity range: 1 to 127 (i.e., Note On only)

2.2 Control Change

2.2.1 Bank Select MSB (0), LSB (32)

Bank Select MSB and LSB messages are received. These mes-

sages can also be sent by turning on the output of MIDI Program

Change messages in the KitCommon area.

MSB = 0, LSB = any value: General MIDI instrument voices

MSB = 127, LSB = any value: General MIDI drum voices (see Note 1)

MSB = 125, LSB = 1: Drum kits (see Note 2)

* Note 1

When received, GM drum voices are selected for song parts.

Playback parts do not change.

* Note 2

The drum kit having the same number as the received program

number is selected. If received on MIDI channel 10, the same

drum kit will also be selected for playback parts.

2.2.2 Modulation (1)

Modulation messages are received but not transmitted.

2.2.3 Foot Controller (4)

Foot Controller messages are transmitted and received.

2.2.4 Portamento Time (5)

Portamento Time messages are received but not transmitted.

2.2.5 Data Entry (MSB = 6, LSB = 38)

Data Entry messages are received but not transmitted. These

messages are used to specify RPN data.

2.2.6 Main Volume (7)

Main Volume messages are received. These messages can also

be sent by turning on the output of MIDI Control Change mes-

sages in the KitCommon area.

2.2.7 Pan (10)

Pan messages are received. These messages can also be sent

by turning on the output of MIDI Control Change messages in the

KitCommon area.

A value of 0 corresponds to the far left of the stereo image; a

value of 127, to the far right.

2.2.8 Expression (11)

Expression messages are received but not transmitted.

2.2.9 Hold 1 (64)

Hold 1 messages are received but not transmitted.

12 DTX502 Reference Manual

2.2.10 Portamento Switch (65)

Portamento Switch messages are received but not transmitted.

2.2.11 Sostenuto (66)

Sostenuto messages are received but not transmitted.

2.2.12 Harmonic Content (71)

Harmonic Content messages are received but not transmitted.

2.2.13 EG Release Time (72)

EG Release Time messages are received but not transmitted.

2.2.14 EG Attack Time (73)

EG Attack Time messages are received but not transmitted.

2.2.15 Brightness (74)

Brightness messages are received but not transmitted.

2.2.16 Effect 1 Depth (91)

Effect 1 Depth messages are received but not transmitted. The

message value corresponds to the Reverb Send level.

2.2.17 Data Increment (96), Decrement (97)

Data Increment and Decrement messages are received but not

transmitted.

2.2.18 RPN

$00/$00 Pitch bend sensitivity: Received but not transmitted.

$00/$01 Fine tuning: Received but not transmitted.

$00/$02 Coarse tuning: Received but not transmitted.

$7F/$7F NULL: Received but not transmitted.

2.3 Channel Mode

All types of Channel Mode message are received, but none are trans-

mitted.

2.3.1 All Sound Off (120)

Upon receipt of an All Sound Off message, the DTX502 mutes all

voices currently playing on the corresponding channel.

2.3.2 Reset All Controllers (121)

Upon receipt of a Reset All Controllers message, the DTX502

resets the following controllers to their initial values:

Pitch Bend, Modulation, Expression, Hold 1, Portamento, Soste-

nuto, RPN, Harmonic Content, Release Time, Attack Time, and

Brightness

2.3.3 All Note Off (123)

Upon receipt of an All Note Off message, the DTX502 mutes all

notes currently playing on the corresponding channel. If Hold 1 or

Sostenuto is turned on, however, muting will not take place until

said controller is turned off.

2.3.4 Omni Off (124)

Upon receipt of an Omni Off message, the DTX502 acts in the

same way as if an All Notes Off message had been received.

2.3.5 Omni On (125)

Upon receipt of an Omni On message, the DTX502 acts in the

same way as if an All Notes Off message had been received.

2.3.6 Mono (126)

Upon receipt of a Mono message, the DTX502 acts in the same

way as if an All Sound Off message had been received.

2.3.7 Poly (127)

Upon receipt of a Poly message, the DTX502 acts in the same

way as if an All Sound Off message had been received.