Yamaha DTX900 펌웨어 업데이트 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha DTX900에 대한 펌웨어 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DTX900 4 페이지. Sampling a “one shot” sound
Yamaha DTX900에 대해서도 마찬가지입니다: 데이터 목록 (28 페이지), 펌웨어 업데이트 매뉴얼 (5 페이지), 빠른 시작 (2 페이지)

페이지 인쇄

How to update the firmware

IMPORTANT

Please save your important data onto the USB storage device before updating the

firmware of the DTXTREME III/DTX900/DTX900M.

NOTICE

DO NOT power off or remove the USB storage device from the product during the

updating process. Your DTXTREME III/DTX900/DTX900M may become inoperable.

1. After downloading, decompress the archived file, and then find the "***.PGM" file.

Copy the "***.PGM" file to the USB storage device.

2. Make sure to turn the power off (the Standby/On switch is set to the Standby

position (

) ) , and then connect the USB storage device to the USB TO DEVICE

terminal on the rear panel.

3. Hold down the [F1] and [REC] buttons simultaneously, and then turn the power on

(

) by pressing the Standby/On switch on the rear panel.

4. Press the [ENTER] button to start the update process.

This process takes a few minutes.

5. When the update process is completed, following message will appear, and you can

turn the power off (the Standby/On switch is set to the Standby position (

DTXTREME III： Completed. Reboot DTXTREME III.

DTX900/DTX900M： Completed. Reboot DTX900.

6. Check the version of the firmware by following the instructions in "How to check the

version of your DTXTREME III/DTX900/DTX900M" in this document, and confirm

that your product has been successfully updated.

This concludes the update process.

C.S.G., DMI Development Division, Yamaha Corporation

) ).