Yamaha EG112C 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha EG112C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha EG112C 14 페이지. Owners manual

For best results the bridge should always be adjusted so it is

parallel to the top surface of the guitar as shown in illustra-

tion (below). This position is maintained by opposing tension

between the strings and the claw springs. If you change string

gauge, you will need to readjust the spring tension to return

the bridge back to the parallel position.

The adjustment procedures are:

1) Remove the screws that attach the tremolo cavity back plate

from the back side of the guitar exposing the claw springs.

2) Make sure that the guitar is tuned to proper pitch.

3) If the bridge is tilted forward (up), tighten spring tension

by turning the claw screws clockwise. If the bridge is tilted

back (down), loosen the spring tension by turning the claw

screws counterclockwise.

(illustration — A)

Be sure to check string pitch after each adjustment to the

spring tension.

BRIDGE/SPRING TENSION ADJUSTMENTS

Adjust the height uniformly

using the two screws A.