Blackberry BLACKBERRY CURVE 8350I 시작하기 - 페이지 3
{카테고리_이름} Blackberry BLACKBERRY CURVE 8350I에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackberry BLACKBERRY CURVE 8350I 14 페이지. Blackberry curve 8350i: quick start
Blackberry BLACKBERRY CURVE 8350I에 대해서도 마찬가지입니다: 안전 및 제품 정보 (33 페이지), 시작하기 매뉴얼 (46 페이지), 제품 정보 (35 페이지)
페이지 인쇄Get Your Device Ready
>
Make Sure the SIM Card Is Inserted
Your SIM (Subscriber Identity Module) card is a small card inserted into
the SIM card holder within your BlackBerry
need to remove or insert the SIM card. If you need to do so, please
consult the Basics Guide.
1. Remove the battery compartment cover. Press the release button and
remove the battery cover from the back of the device.
2. Ensure that the SIM card is inserted in the slot in the battery
compartment.
If no SIM card came with your BlackBerry device, contact
Nextel Customer Service at 1-800-639-6111.
>
Insert the Battery
1. With the battery cover removed (see step 1 above), insert the battery into
the battery compartment and gently press down until it clicks into place.
2. Replace the battery cover.
>
Charge the Battery
1. Plug the charger into an outlet.
2. Plug the other end of the charger into the device's USB port.
®
device. You should never
>
Activate Your Device
If you bought your device at a Sprint Store, it is probably activated and
ready to use. If it is not activated, call Nextel Customer Service at
1-800-639-6111 from any other phone.
• If it is not on already, press and hold
device on.
When your device powers up the first time, it performs a series of
security checks and then automatically connects to the Nextel National
Network.
If your BlackBerry device or service is not active, call Nextel Customer
Service at 1-800-639-6111 from any other phone.
>
Complete the Setup Wizard
The setup wizard starts automatically when you power your BlackBerry
device on for the first time. It is also available through the Setup folder.
1. From the Home screen, roll the trackball to highlight Setup (
(press) the trackball.
2. Click Setup Wizard (
). From the wizard, click Continue.
3. Read the introduction, click Next, and follow the onscreen instructions to
complete the setup wizard.
to power the BlackBerry
®
) and click