Yamaha PSS-A50 참조 - 페이지 2

{카테고리_이름} Yamaha PSS-A50에 대한 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha PSS-A50 4 페이지. Midi reference
Yamaha PSS-A50에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)

페이지 인쇄

MIDI Functions

The explanations here cover the settings necessary for performing MIDI communication. For instructions on making these settings,

refer to page 12 in the Owner's Manual.

NOTE

For instructions on how to connect this instrument to a computer, refer to the page 6 in the Owner's Manual.

MIDI Out Channel Selection

In order to perform MIDI communication between this instrument and a computer, it is necessary to

match the corresponding MIDI out channel. By setting the MIDI out channels on this instrument, the set-

ting of the keyboard or Arpeggio sequence or the program change can be transmitted over the channel

number corresponding to a specified channel on the computer.

Transmit data and Channel settings

The data in the list below are transmitted over the channel number(s) automatically set based on the

transmit channel for the keyboard Voice.

Keyboard Voices

Arpeggio sequence

Keyboard performance recorded to

this instrument

Arpeggio sequence recorded to this

instrument

NOTE

• Selecting the next channel number from channel 16 returns to channel 1.

• No data is transmitted if the transmit channel for the keyboard Voice is set to "oFF."

• For instructions on recording to this instrument, refer to page 10 in the Owner's Manual.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,

allowing the internal Voices to be played directly from the keyboard. This situation is "Local Control On," since the internal

tone generator is controlled locally by its own keyboard. Local control can be turned off, however, so that the keyboard of the instru-

ment does not play the internal Voices, but the appropriate MIDI information is still transmitted via the 5V DC / USB TO HOST termi-

nal when notes are played on the keyboard.

Program Change ON/OFF

The information related to Voice changes is called "program change" in MIDI. Transmitting and receiving program change messages

can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to on,

Voice change information in this instrument can be transmitted to or received from a computer.

(However, the Voice as played from the keyboard is maintained and does not change.)

Control Change ON/OFF

Information related to non-note expressive changes is called "control change" in MIDI. Transmitting and receiving control change

messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set

to on, performance information on this instrument can be transmitted to or received from a computer. (However, the performance infor-

mation from the instrument is maintained and does not change.)

PSS-A50 MIDI Reference

Setting range: 01–16, oFF

Default setting: 01

Keyboard Voices channel number +1

Keyboard Voices channel number +2

Keyboard Voices channel number +3

NOTE

Panel settings (Voices, etc.) of this instru-

ment will not be affected by MIDI mes-

sages received from a computer.

NOTE

This instrument cannot play back MIDI

data (received from a computer) that

includes Voices that are incompatible with

this instrument.