Yamaha Silent Bass SLB-100 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Yamaha Silent Bass SLB-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Bass SLB-100 17 페이지. Yamaha silent bass owner's manual
Yamaha Silent Bass SLB-100에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)

페이지 인쇄

■ About the End Pin

Loosen the end pin stopper, extend the end

pin to a comfortable length for playing and

firmly tighten the end pin stopper.

• Make sure the end pin stopper is secured firmly to

prevent the instrument from falling while you play.

■ Putting the Bass into the Optional Soft Case

Before putting the bass into the optional Silent Bass soft case, remove the frame unit from

the Silent Bass and pack the components into the case as shown in the diagram below.

• Use the Velcro® fasteners (2 locations) inside the case to secure the frame unit in place.

• When putting the bow in the soft case, make sure that it is first put into the hard bow case, then place the

hard case in the pocket and secure with a Velcro® fastener (1 location).

• When the case is placed on its side with the instrument packed inside, make sure that the side holding

the main unit is placed on the bottom (so the side with the frame is on top).

Silent Bass Main Unit

Frame Unit

The soft case does not fully protect parts such as the bridge from damage.

The soft case is meant for storing and transportation of the instrument and protects it from dust, etc. Do

not place the bridge so it is on the bottom of the case and do not cause damage to the instrument by

placing objects on top of the case, hitting it, etc.

Hard Bow Case

Bow Pocket

Velcro® Fasteners

Tighten

Loosen

End Pin Stopper

End Pin