Yamaha Silent Bass SLB-100 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Yamaha Silent Bass SLB-100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Bass SLB-100 18 페이지. Yamaha silent bass owner's manual
Yamaha Silent Bass SLB-100에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지)

페이지 인쇄

■ Tuning

The SILENT Bass™ is shipped from the factory with the bridge in place and the strings

slightly loosened. The bridge's height is set to an average height.

Since the position of the bridge will sometimes shift during transport, please properly

adjust the position of the bridge before tuning the strings.

• The lower side of the bridge supports the 1

the higher side supports the 4

ing at the bridge from the side, the surface that has a

sharper curve should face the fingerboard. (Facing up

when in the playing position). (Fig. 1)

• The side of the bridge facing the tailpiece should be

at a right angle compared to the body. (Fig. 2)

• The height of the instrument's bridge is adjustable.

Turning the round legs clockwise will raise the bridge

higher. Turning the round legs counter-clockwise will

lower the bridge's height. (Fig. 3)

The bridge's legs

[Fig. 3 : Adjusting bridge height]

• Before adjusting the bridge's height, make sure that the strings are loosened so that the legs can turn

easily. If string tension is too tight and the legs are turned by force, it may result in damage to the

bridge, pickup, etc.

• Make sure that both of the bridge's legs are adjusted to the same height. If both legs are not stable and

string tension is increased, the bottom of the bridge will not have adequate contact with the pickup

resulting in poor sound quality, noise, damage, etc. (Fig. 3-*1)

Setup

string (G),

string (E). When look-

Adjust to the

same height.

Clockwise

Higher

Lower

Counter-

clockwise

Groove

4th string

[Fig. 1 : Looking from the tailpiece]

Correct

Bad

Right angle

Body

[Fig. 2 : Bridge stands vertically]

1st string

Tailpiece