Yamaha Silent Cello SVC110S 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha Silent Cello SVC110S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Cello SVC110S 13 페이지.
Yamaha Silent Cello SVC110S에 대해서도 마찬가지입니다: 서비스 매뉴얼 (29 페이지)

페이지 인쇄

• If the adjuster is too loose,

Caution

it could produce noise

while playing.

Don't loosen

too much.

• When the instrument is not being used, loosen the strings until the pitch drops a whole tone.

• If the instrument is not going to be used for an extended period of time, loosen the strings even more.

• Before using the instrument, make sure that the bridge is positioned vertically. Damage to the bridge

and poor sound quality may result if the bridge is not properly positioned.

● Winding the Strings

(Refer to this section when changing the strings.)

Before you string the instrument, set all adjusters so that

they are in the middle of their adjustment ranges.

Place the ball (on the end of the string) in the notch on

the adjuster. Make sure the ball is properly inserted in the

adjuster's notch.

Insert the other end of the string into the hole on the tuning peg. Rotate the tuning peg. As shown

in the illustration, wind the string on the side away from the peg handle once around the peg, then

return the string back overlapping that wind so that the remaining slack is wound gradually toward

the peg handle. 1st (A) and 2nd (D) strings are shown on the left, 3rd (G) and 4th (C) strings on the

right.

3rd string (G)

Rotate the

tuning peg

as shown

4th string (C)

Caution

String

Ball

2nd string (D)

Rotate the

tuning peg

as shown

Remaining

1st string (A)

winds

Make sure that the Tail Nylon is correctly

positioned on top of the Saddle.

The adjuster should

be set to the middle of

its adjustmenLt range.

Adjuster's notch

Winding the 3rd

and 4th strings

1st

wind

Saddle

Tail nylon

Winding the 1st

and 2nd strings

Remaining

winds