Yamaha Silent Guitar SLG-100N 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Yamaha Silent Guitar SLG-100N에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Guitar SLG-100N 16 페이지. Yamaha guitar user manual
Yamaha Silent Guitar SLG-100N에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (40 페이지), 서비스 매뉴얼 (23 페이지), 서비스 매뉴얼 (22 페이지), (일본어) 사용 설명서 (17 페이지)

페이지 인쇄

The Silent Guitar operates either on battery power or with an AC adaptor however,

it will consume more power when the reverb function is in use. For that reason, we

recommend that it be powered with the supplied AC power adaptor for normal use.

Always turn the PHONES ON/OFF switch OFF before making AC power connec-

tions or replacing the battery.

I Supplying AC Power

Plug the adaptor's DC output cable into the Silent Guitar's DC IN jack, making sure the plug is firmly

inserted into the jack.

Plug the AC adaptor into a convenient wall AC power socket.

• Battery power is automatically disconnected when the AC adaptor is connected.

• When the AC adaptor is used, the batteries may leak. To prevent leakage we recommend that you remove

the batteries from the instrument. When the AC adapter is used.

• When using an AC adaptor, make sure you use only one of the following recommended adaptors (Recom-

mended Adaptors: PA-D09, PA-1E, PA-3C). The use of any other adaptor may result in damage to the

instrument or cause fire, etc. Please use with caution.

I Installing the Battery

Be sure to use a 9-volt alkaline battery 6LR61. (not

supplied)

• When using a battery, please use an alkaline bat-

tery. Use of a manganese battery will result in an

extremely shorter battery life depending upon the

type of battery used.

Remove the battery compartment cover, located on

the back side of the Silent Guitar, by sliding the tab

labeled "OPEN" toward the head of the guitar.

Attach the 9-volt battery 6LR61 to the battery snap,

and place it in the battery case.

Take careful note of the polarity markings (+/-) as

shown in the illustration when connecting the bat-

tery. (Reversed polarity may damage the circuit.)

Close the battery compartment cover.

When battery power becomes low, the reverb will no longer operate, the lamp will not light and noise will

be present. Replace the battery with a new alkaline battery as soon as possible.

• Always follow the +/– signs when inserting the battery. Improper insertion may result in fire.

• To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove

the battery from the unit when it is not going to be used for an extended period of time.

Power Supply

Battery compart-

ment cover

Battery snap

* For customers in Netherlands

Bij dit produkt zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze

niet weggooien maar inleveren als KCA.

6LR61 9V

Alkaline battery