Yamaha Silent Piano SH Series 유지 관리 핸드북 - 페이지 7

{카테고리_이름} Yamaha Silent Piano SH Series에 대한 유지 관리 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Piano SH Series 24 페이지. Grand piano, upright piano

페이지 인쇄

3 .Check regulation and Adjustment Silent mechanism

Adjustment of action in the Silent mode is done with the Silent mechanism engaged.

Switching of silent / normal play is done with the [POWER] or [QUIET] button on the front panel for

Grand Piano, with the Silent Pedal (Center) for Upright Piano.

Grand Piano

■Hammer shank stopper check / adjustment

[Standard]

・Adjust and set the hammer shank stopper cushion to contact the hammer shank vertically.

・While the silent mechanism is disengaged, hammer shanks do not contact the hammer shank

stopper when depressing keys. (Fig.1)

[Procedure]

Turn the stroke adjustment screws A and B on the treble

side of the Keybed (Fig.2) as necessary to adjust the shank

stopper angle.

・ Turn nut A to so that the hammer shank stopper is

parallel to the strings when the silent mechanism is

inactive.

・Turn nut B to so that the hammer shank stopper is

vertical to the hammer shank when the silent

mechanism is active.

■Hammer shank stopping position adjustment

[Standard]

Set the hammer shank stopping position to 5mm – 6mm from the strings

[Procedure]

Replace Hammer shank stopper cushioning as needed.

Hammer shank stopping position to 5mm – 6mm from the strings

Fig.1

Shank stopper cushioning

Tickness

Part No.

5.5mm

T6210100

5.0mm

T6210110

4.5mm

T6200120

4.0mm

T6210130

3.5mm

T6210140

3.0mm

T6210150

2.5mm

T6210150

Cushion lengths are all 378mm.

Cut as follows:

Bass:365mm, Middle:375mm, Treble:232mm .

‐ 7 ‐

Fig.2