Yamaha Silent Piano UPS-SH Series 유지 관리 핸드북 - 페이지 19
{카테고리_이름} Yamaha Silent Piano UPS-SH Series에 대한 유지 관리 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Piano UPS-SH Series 24 페이지. Grand piano, upright piano
페이지 인쇄
[Damper pedal sensor test]
Grand Piano
Upright Piano
Status
Refer to "Start‐up"
Start‐up
Execute Damper pedal
Press the [+/YES] [‐/NO] button to select "t07", then press the
sensor test
[PLAY] button once to execute the test.
Depress the damper pedal to confirm the tone changes one
after the other according to the following damper pedal
position.
* If adjustment is required, please refer to 5. Calibration Mode
(Page 15).
Confirmation
Release the damper
"PAS" indicates when the pedal returns to the rest position.
pedal
Push the [PLAY] button once to terminate the sensor testing
Complete
item.
[Piano type selection]
Grand Piano
Upright Piano
Status
Refer to "Start‐up"
Start‐up
Execute Piano type
Press the [+/YES] [‐/NO] button to select "t47", then press the
selection
[PLAY] button once to execute the test.
Press the [+/YES] or [‐/NO] button to select the Piano type.
Piano type selection
Flash RAM
Push the [REC] button once to register Piano type.
writing
DP(.) indicates with piano type on the display.
Push the [PLAY] button once to terminate the piano type
Complete
selection item.
Operation
Pedal at the rest position
Pedal lost motion
Pedal beyond the half point
position
Pedal at the end position
Operation
Model (Grand Piano)
C6X, C7X
C3X, C5X, C3TST
C１X, C2X, GC1, GC2
Model (Upright Piano)
YUS3, YUS5, U3, SU7
YUS1, U1, P121, K121CL
P116, Cambridge, Classic T
‐ 19 ‐
Pedal not depressed.
Depress the damper pedal
slightly.
Depress the damper pedal
more beyond half point
position.
Depress the damper pedal
further to the end.
Piano type
→
"C6"
→
"C3"
→
"C1"
Piano type
→
"U3"
→
"U1"
→
"n"
Buzzer sound
Display
No tone
Continuous tone
Intermittent
tone
quick
intermittent
tone
Buzzer sound
Display