Yamaha Silent Violin SV-200 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Yamaha Silent Violin SV-200에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Violin SV-200 16 페이지. Yamaha silent violin owner's manual

I Changing Strings

As the strings get old, sound quality will gradually decrease, and it will become difficult to tune

the instrument. Change the strings as soon as you think they are getting old.

Always change the strings one at a time, even if all strings must be changed.

• The end of the strings are sharp and can cut fingers. Use caution when changing strings.

• When changing or adjusting strings, do not put your face close to the instrument. The string may

suddenly break resulting in eye or other unexpected injuries.

Before you string the instrument, set the adjuster

so that it is in the middle of its adjustment range.

(on the 1st string only)

Attach the string to the tailpiece.

• On the 4th (G), 3rd (D) and 2nd (A) strings,

from above the tailpiece insert the ball end of

the string into the hole on the tailpiece and hook

the ball end into the notch string hole.

• On the 1st (E) string, hook the ball end of the

string into the notch on the adjuster. At this

time, make sure that the ball is properly seated

in the notch on the adjuster.

• Make sure that the tailpiece wire is

Caution

properly positioned around the

endpin.

Tailpiece

Endpin

[Attaching the 4th (G), 3rd (D) and 2nd (A) strings]

String

Tailpiece

String

Tailpiece wire

The adjuster should be set

to the middle of its adjust-

ment range.

Ball end

Looking from the under-

side of the tailpiece.

[Attaching the 1st (E) string]

Ball end

Adjuster's notch

Ball end