Yamaha Silent Violin SV255 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Yamaha Silent Violin SV255에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Silent Violin SV255 19 페이지. Owner's manual
Yamaha Silent Violin SV255에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지)

페이지 인쇄

■ Tuning and Changing the Strings

Because the bridge includes a built in sensor,

which is connected to the body with a thin cable,

the instrument ships from the factory with the

bridge laying down. First, set up the bridge and

then proceed with tuning. As the strings get old,

sound quality will gradually decrease, and it will

become difﬁ cult to tune the instrument. Change

the strings as soon as you think they are getting

old.

• The end of the strings are sharp and can

Caution

cut ﬁ ngers. Use caution when changing

strings.

• When changing or adjusting strings, do

not put your face close to the instrument.

The string may suddenly break resulting

in eye or other unexpected injuries.

• The lower side of the bridge supports the 1st string (E),

the higher side supports the 4th string (G)/5th string

(C). Make sure the bridge is placed properly, then set

the bridge in the bridge seat.

• Ensure that the bridge stands vertically. If it leans to

one side, use both hands to adjust. Make sure that

each string passes over the corresponding slits in the

bridge.

Bad

Body

Bridge seat

Correct

Bad

Vertical

Tailpiece

Set up

4th string

5th string

[Bridge is placed vertically]

Groove

SV250

Groove

SV255

[Looking from the tailpiece]

Bridge seat

Bridge feet

[Make sure the bridge feet do not

come in contact with the bridge seat]

1st string