Yamaha SilentPiano U1-Silent 소유자 매뉴얼 - 페이지 13
{카테고리_이름} Yamaha SilentPiano U1-Silent에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha SilentPiano U1-Silent 31 페이지. Owners manual
Yamaha SilentPiano U1-Silent에 대해서도 마찬가지입니다: 브로셔 및 사양 (20 페이지), 서비스 매뉴얼 (49 페이지)
페이지 인쇄
Setting the Amount of Reverb
Reverb adds echo to the sound to give it more fullness and reverberation.
Use the REVERB control to adjust the depth (the degree to which the reverb
effect is applied to the sound). To turn the reverb off, set the control in the far
left position.
You can also change the type of reverb to apply.
Reverb type
Effect
Room
Reverberation similar to that heard in a normal
room
Hall 1
Reverberation similar to that heard in a small
(Default setting)
concert hall
Hall 2
Reverberation similar to that heard in a large
concert hall
Stage
Reverberation similar to that heard on a stage
The reverb type reverts to its default setting when you turn the power off.
A
#
-1
A-1 B-1
C2 (Room)
D2 (Hall 1)-default E2 (Hall 2)
Adjusting the Pitch (Tuning)
The pitch of this instrument is set so that A3=440Hz. You can fine tune the pitch up or down 65 cents in 1 cent
steps (100 cents is equal to 1 semitone).
Operation
Raise the pitch
Lower the pitch
Return to default tuning
The pitch setting is stored when you turn the instrument off.
A
#
-1
A-1 B-1
F2 (Stage)
Setting method
Hold down the A-1 and B-1 keys and press any one of the keys between C3 and B3.
Hold down the A-1 and A#-1 keys and press any one of the keys between C3 and B3.
Hold down the A-1, A#-1, and B-1 keys and press any one of the keys between C3 and B3.
C3–B3
Setting method
Hold down the A-1, A#-1, and B-1 keys and press C2.
Hold down the A-1, A#-1, and B-1 keys and press D2.
Hold down the A-1, A#-1, and B-1 keys and press E2.
Hold down the A-1, A#-1, and B-1 keys and press F2.
7