Yamaha SilentPiano U1-Silent 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Yamaha SilentPiano U1-Silent에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha SilentPiano U1-Silent 31 페이지. Owners manual
Yamaha SilentPiano U1-Silent에 대해서도 마찬가지입니다: 브로셔 및 사양 (20 페이지), 서비스 매뉴얼 (49 페이지)

Yamaha SilentPiano U1-Silent 소유자 매뉴얼

Connecting the USB Memory

Connecting commercially available USB memory to the unit allows you save recording data, and playback songs
stored on the memory.
Insert the USB memory into the USB terminal on
bottom left of the control box.
The unit automatically begins checking the contents of the USB
memory. During checking the PLAY/STOP lamp blinks rapidly,
changing to a pale orange when the process is complete.
Caution
• Do not remove the USB memory or turn the power on or off during data
transfer, as breakage may result.
• Do not insert and remove the USB memory too frequently as breakage
may result.
• Be careful not to bump the USB memory with your legs when it is
connected to the unit.
• Do not insert any objects other than the USB memory into the USB terminal, as it may become unusable.
• Check that the USB memory is free of memory- and software protection before attempting to use it, as these kinds of
protection will prohibit access to the memory.
• This unit is USB 1.1 compliant. You can also connect USB 2.0 devices to it, however data will be transferred at USB
1.1 speeds.

Saving Recorded Data to USB Memory

You should back up important data to a storage medium such as a computer, in addition to saving it on USB
memory. Saving data to USB memory without backing it up other storage media means that there is a risk of
losing the data through jarring and shocks.
1
Insert the USB memory into the unit.
The PLAY/STOP button flashes orange, and lights pale orange when the unit has completed checking the
memory.
2
Press the REC button.
The unit changes to transfer standby mode, the REC lamp lights red,
and the PLAY/STOP lamp blinks orange.
Note
Press the REC button once more to cancel transfer standby mode and
return the unit to its normal state.
USB
IN
MIDI
11