Yamaha Sousaphone 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Yamaha Sousaphone에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha Sousaphone 22 페이지. Owner's manual
페이지 인쇄Before You Play
■ Assembling the Leadpipe
(Sousaphone only)
The sousaphone uses a multi-piece leadpipe.
This leadpipe in combination with a bit allows
the player to adjust the mouthpiece to a com-
fortable position to best fit individual needs.
1.
Apply some slide grease to the middle sec-
tion of the leadpipe and then insert it into
the leadpipe receiver. Next, tighten the
screw on the receiver to secure the middle
pipe in place.
Bit
Receiver Screw
Mouthpiece
* If the bit is left on the leadpipe, it may
become stuck in place. After playing, make
sure that the bit is removed from the
leadpipe and remove moisture from the
bit.
* The YSH-411 is supplied with two different
bits. Both can be connected together if
necessary.
26
Leadpipe
Middle pipe
Leadpipe
receiver
■ Assembling the Marching Tuba
(Marching series only)
The leadpipe on one of the marching series tuba
models can be switched to convert the instru-
ment between marching use and regular con-
cert use. (An "M" at the end of the product num-
ber indicates a marching series tuba.)
1.
Loosen screws A and B to remove the regu-
lar concert leadpipe, then attach the march-
ing leadpipe and tighten screws A and B.
Concert leadpipe
B
* The marching type mouthpipe may
become stuck or difficult to remove if left
in the tuba. Please use caution.
2.
Insert the square support on the backside
of the instrument and use screw E to adjust
the leadpipe angle, then tighten screws C
and D to secure it.
Backside
C
E
Square support
A
D
Marching
D
leadpipe