Yamaha WX5 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Yamaha WX5에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha WX5 44 페이지. Yamaha wind midi controller owner's manual

페이지 인쇄

Direct Program Change Entry

Specific program change numbers can be directly trans-

mitted from the WX5 by using the playing keys (num-

bers 1 through 0 are assigned to the keys - see illustration

above) while pressing the Program Change button.

1-digit Example: Program Change Number 003

Press the A key (number 3) while holding the Program

Change button. Program change number 003 will actu-

ally be transmitted when the Program Change key is re-

leased.

An alternative method is to enter all three digits of the

number in sequence - [0][0][3]. In this case the program

change number will actually be transmitted as soon as

the last digit is entered.

2-digit Example: Program Change Number 012

Press the B key (number 1) and then the A# key (number

2) while holding the Program Change button. Program

change number 012 will actually be transmitted when the

Program Change key is released.

An alternative method is to enter all three digits of the

number in sequence - [0][1][2]. In this case the program

change number will actually be transmitted as soon as

the last digit is entered.

3-digit Example: Program Change Number 124

Press the B key (number 1), the A# key (number 2), and

then the G key (number 4) while holding the Program

Change button. Program change number 124 will actu-

ally be transmitted as soon as the last digit is entered.

Bank Number Transmission

LSB (Least Significant Bits) numbers before transmit-

ting a program change number, it is possible to change

banks and voices at the same time.

ing the Program Change button and the D# key, then en-

ter the 3-digit bank select LSB number while holding the

Program Change button and the C key.

Bank Select MSB

Bank Select LSB

not be transmitted until the next program change num-

ber is transmitted, as described in the preceding section.

Program Change Control

• This method cannot be used to change the bank se-

lect number. The specified voice number within the

current bank will be selected. To change the bank num-

ber see "Bank Number Transmission", below.

By specifying bank MSB (Most Significant Bits) and

Enter the 3-digit bank select MSB number while hold-

The specified bank select MSB and LSB numbers will

Playing Key