Yamaha YCL-450NM 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Yamaha YCL-450NM에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YCL-450NM 14 페이지. Clarinet

Caution When Assembling

As bridge keys protrude from the neck, upper joint,

lower joint, and bell on the alto and bass clarinets, be

careful not to damage or bend these parts when assem-

bling the instrument. The bell section and tone hole

on the alto clarinet is thin so please use extra caution

when assembling these parts.

Attaching the bell to the lower joint.

Holding the bottom of the bell in your right

hand, slide the bell section partially onto the

joint.

Hold down the pad plate on the bell with your

right thumb then slide the bell all the way

onto the joint.

When assembling the bass clarinet, insert the

peg at this point to provide stability when

standing the instrument on the floor.

Assemble the upper and lower joints.

While checking the position of the bridge keys,

align the upper and lower bridge keys and slide

the upper and lower joints together without

twisting.

* Make sure the upper and lower bridge keys do not

come into contact with each other.

Alto Clarinet / Bass Clarinet

Bell

Attach the neck to the upper joint.

● On the alto clarinet

After attaching the mouthpiece to the

neck, insert the neck into the upper joint.

● On the bass clarinet

Attach the lower and upper neck sections

and secure them with the fastening screw.

Next, attach the mouthpiece onto the

upper neck and then the mouthpiece/neck

assembly into the upper joint.

Assembly

bridge key