Yamaha YDP-101 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Yamaha YDP-101에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YDP-101 48 페이지. Yamaha digital piano owner's manual
Yamaha YDP-101에 대해서도 마찬가지입니다: (영어) 사용 설명서 (47 페이지)

페이지 인쇄

Reverb

The [REVERB] button selects a number of digital reverb effects that you can

use for extra depth and expressive power.

ROOM

HALL1

REVERB

HALL2

STAGE

ROOM

SONG

HALL1

SELECT

REVERB

HALL2

STAGE

– /NO

YDP-101

To select a reverb type press the [REVERB] button a few times until

the indicator corresponding to the desired type lights (the indicators

light in sequence each time the [REVERB] button is pressed). No

reverb is produced when all indicators are off.

OFF

No reverb effect is selected when no REVERB indicator is lit.

ROOM

This setting add a continuous reverb effect to the sound that is similar

to the type of acoustic reverberation you would hear in a room.

HALL 1

For a "bigger" reverb sound, use the HALL 1 setting. This effect

simulates the natural reverberation of a small-size concert hall.

HALL 2

For a really spacious reverb sound, use the HALL 2 setting. This effect

simulates the natural reverberation of a large concert hall.

STAGE

A simulation of the type of reverb produced in a stage environment.

NOTE

Adjusting Reverb Depth

Adjust the reverb depth for the selected voice by using the [–/NO]

and [+/YES] buttons while holding the [REVERB] button. The depth

/YES

range is from 0 through 20 (the current depth setting appears on the

LED display while the [REVERB] button is held). A setting of "0"

produces no effect, while a setting of "20" produces maximum reverb

depth. Press the [–/NO] and [+/YES] buttons simultaneously while

holding the [REVERB] button to recall the default setting for the

current voice (default depth settings are different for each voice).

• The default reverb type (including OFF) and depth settings are different

for each voice.

.........................................................................