Yamaha YDP-101E 소유자 매뉴얼 - 페이지 28
{카테고리_이름} Yamaha YDP-101E에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YDP-101E 48 페이지. Yamaha digital piano owner's manual
페이지 인쇄
The Function Mode
F7
MIDI Functions
G A Brief Introduction to MIDI
MIDI OUT
YDP-101
and velocity (touch response) information via the MIDI OUT connector whenever a note is played on the
keyboard. If the MIDI OUT connector is connected to the MIDI IN connector of a second keyboard (synthesizer,
etc.) or a tone generator (essentially a synthesizer with no keyboard), the second keyboard or tone generator will
respond precisely to notes played on the original transmitting keyboard. The result is that you can effectively
play two instruments at once, providing thick multi-instrument sounds.
Data Being Recorded
MIDI OUT
MIDI IN
YDP-101
After selecting "F7. Y ", press the [+/YES] button to engage the MIDI function sub-mode, then use
the FUNCTION [<] and [>] buttons to select the desired MIDI function, as listed below.
NOTE
F7.1: MIDI Transmit Channel Selection
F7.2: MIDI Receive Channel Selection
MIDI OUT
Sequencer
MIDI sequence recorder could be used to "play" two different instruments or tone generators. One of
the instruments or tone generators could be set to receive only on channel 1, while the other is set to
receive on channel 2. In this situation the first instrument or tone generator will respond only to
channel-1 information transmitted by the sequence recorder, while the second instrument or tone
generator will respond only to channel-2 information. This allows the sequence recorder to "play"
two completely different parts on the receiving instruments or tone generators.
28
YDP-101
standard communication interface that allows MIDI-compatible
MIDI Cable
musical instruments and equipment to share musical information and
MIDI IN
control one another. This makes it possible to create "systems" of
Tone
MIDI instruments and equipment that offer far greater versatility and
Generator
control than is available with isolated instruments. For example, most
MIDI keyboards (including the YDP-101, of course) transmit note
sequence recording. A sequence recorder can be used to "record"
MIDI data received from a YDP-101, for example. When the re-
Playback Data
corded data is played back, the YDP-101 automatically "plays" the
MIDI OUT
MIDI IN
recorded performance in precise detail.
Sequencer
can do much, much more. The YDP-101 MIDI functions allow it to
be used in fairly sophisticated MIDI systems.
• Always use a high-quality MIDI cable to connect MIDI OUT to MIDI IN terminals. Never use MIDI cables longer
than about 15 meters, since cables longer than this can pick up noise which can cause data errors.
MIDI IN
MIDI THRU
Tone Generator
(Set to receive on MIDI
channel 2)
YDP-101
(Set to receive on MIDI channel 1)
MIDI, the Musical Instrument Digital Interface, is a world-
This same type of musical information transfer is used for MIDI
The examples given above really only scratch the surface. MIDI
............................................................................................
.............................................................................................
The MIDI system allows transmission
MIDI IN
and reception of MIDI data on 16 differ-
ent channels. Multiple channels have
been implemented to allow selective
control of certain instruments or devices
connected in series. For example, a single