Yamaha YDP-121 소유자 매뉴얼 - 페이지 26

{카테고리_이름} Yamaha YDP-121에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YDP-121 40 페이지. Yamaha digital piano owner's manual
Yamaha YDP-121에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)

페이지 인쇄

The Function Mode

Left Pedal Mode

operation. Use the [–/NO] and [+/YES] buttons to select the desired left-pedal mode. "1" is

the normal soft-pedal mode and "2" is the start/stop mode. When the start/stop mode is se-

lected, the left pedal functions in the same way as the panel [START/STOP] button. Press the

[–/NO] and [+/YES] buttons simultaneously to recall the default setting "1".

Metronome Volume

and [+/YES] buttons to set the metronome volume as required. The volume range is from 1

through 20. A setting of "1" produces minimum sound, while a setting of "20" produces

maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall

the default setting "10".

Piano Song Part Cancel Volume

playback (see page 13 for information on the "part-cancel" function). Use the [–/NO] and [+/

YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting

of "0" produces no sound, while a setting of "20" produces maximum volume. Press the [–/

NO] and [+/YES] buttons simultaneously to recall the default setting "5".

along with. Set to "0" if you don't want to hear the part.

YDP-121

This function sets the left pedal for normal soft-pedal operation or for song start/stop

SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-

TION] button while holding the [METRONOME] button.

The volume of the metronome sound can be changed. After selecting "F5", use the [–/NO]

This function sets the volume at which a "canceled" part is played during piano song

Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play