Yamaha YDS-150 소유자 매뉴얼 - 페이지 15

{카테고리_이름} Yamaha YDS-150에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YDS-150 25 페이지. Digital saxophone

페이지 인쇄

Setting the Reed and Ligature

Slide the mouthpiece onto the body's neck, turning from

side to side. After attaching the mouthpiece, set the reed

and ligature onto the mouthpiece.

NOTICE

• The reed tip is delicate so please take care not to dam-

age it with the ligature, etc.

Mouthpiece

Ligature

Slide the ligature onto the mouthpiece from its

tapered end.

Position the reed so that the edge of the mouth-

piece is slightly visible over the reed tip. Tighten

the two screws on the ligature to secure the reed

in place.

* Position the ligature so that the tuning fork logo is cen-

tered in the ligature's open space.

Reed

Ligature

screws

NOTICE

• Use the dedicated mouthpiece set (mouthpiece, reed,

ligature) included with this instrument. Failure to do so

can result in sound not being produced properly or other

malfunctions.

• Tighten the ligature screws just enough to keep the reed

from moving. Take care not to over-tighten.

• Do not wash this instrument or the instrument interior

with water. Doing so can result in damage to the instru-

ment.

• Do not apply grease to the instrument neck. Doing so

can result in damage to the neck.

• When the connection between the neck and the mouth-

piece is getting looser, replace the O-ring with the

included replacement one.

• If over the course of use the tip of the reed is broken off

or the reed becomes disfigured, replace it with the

included replacement reed.

Troubleshooting

• Sound does not stop.

- Try turning the power on again.

- Fluid remaining on the hole inside the mouthpiece

Reed

Specifications

Product name

Voices

Bluetooth

Ligature

Power supply

Power

consumption

Yamaha logo

Auto Power

Off

Size (W x D x H) 699 mm (W) × 110 mm (D) × 103 mm (H)

Weight

* The contents of this manual apply to the latest specifica-

joint may result in the sound not stopping. Remove

fluid from the hole by using a slim cotton swab.

Digital Saxophone

AWM Sampling

Bluetooth version: 4.2

Supported profile: A2DP

Complies with Bluetooth Low Energy

MIDI Specification

Wireless output: Bluetooth Class 2

Maximum communication distance:

About 10 m

Radio frequency (Operation frequency):

2,402 to 2,480 MHz

Maximum output power (EIRP): 4 dBm

Type of modulation: FHSS

USB AC adaptor: 5 V / 1 A

Self-powered USB hub: 5 V / 1 A

Four "AAA" size alkaline (LR3) or

Ni-MH rechargeable (HR3) batteries

4.5 W (when using a USB AC adaptor)

Yes

1.0 kg (not including batteries)

tions as of the publishing date. To obtain the latest man-

ual, access the Yamaha website then download the

manual file.

Since specifications, equipment or separately sold

accessories may not be the same in every locale, please

check with your Yamaha dealer.

YDS-150 Owner's Manual