Yamaha YG-2500 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha YG-2500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YG-2500 13 페이지. Concert glockenspiel
Yamaha YG-2500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (13 페이지), 소유자 매뉴얼 (13 페이지)

페이지 인쇄
Yamaha YG-2500 소유자 매뉴얼
1-2
Position the pedal stay so the indentation is facing up, and insert the pedal stay all the way into
the receiver (low register side) on the leg (at this point, the wing bolt's end is aligned with the
indentation on the pedal stay), then tighten the wing bolt to secure.
Attach the pedal stay assembly to the high register side in the same manner.
* Use the hole close to the indentation as a reference for aligning the pedal stay.
Wing bolt
Receiver
(low register side)
The illustration shows attachment of the pedal
stay to the low register side.
1-3
After confirming that both right and left legs are standing vertically, attach one end of the leg
stay that is attached to the pedal stay, onto the leg (low register side) using the wing nut locat-
ed between the two upright legs, and tighten the wing nut to secure.
* Slide the end of the stay firmly onto the bolt.
Pedal stay
Indentation
End of leg stay
Wing nut
Wing bolt
Use this hole for aligning
Pedal stay
Indentation
Leg
(low register side)
Leg
(low register side)
Leg stay
Assembly
19