Yamaha YM-410 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha YM-410에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YM-410 19 페이지. Concert marimbas
Yamaha YM-410에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

YM-460/460F/410/410F/46/41

ASSEMBLY

1-2. YM-460/460F/46: Connect the reinforcement stays at the center. Align the end of the fixing bolt and

the holes in the reinforcement stays and tighten the fixing bolt securely.

* Insert the support using the reference hole close to the hole for the screw as a guide.

Reinforcement stay

(Large end)

1-3. Insert the reinforcement stay with its notch facing up into the lower joint of the large end leg as far as

it will go (aligning the notch with the fixing bolt) and tighten the fixing bolt securely.

(A mark "E" is printed on the reinforcement stay and the large end joint.)

Fixing bolt

Leg

1-4. In the same way, install the reinforcement stay to the small end leg.

(There is no marking on the small end joint.)

Screw hole

Reinforcement

stay

Notch

Reference hole

Leg (Large end)

Reinforcement stay

(Small end)

Tighten

Fixing bolt

Notch