Yamaha YM-4600A 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Yamaha YM-4600A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YM-4600A 14 페이지. Concert marimbas
Yamaha YM-4600A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

Insert the rails (1) and (4) into the end frames of the legs.

4-1. Insert the outer rails (1) and (4) in the same way as the inner rails (2) and (3).

A mark "A" is printed on the big end face of the rail (1) and the groove section of the end frame of the

big end leg, and a mark "D" for the rail (4).

"D" mark on the rail

and end frame.

"A" mark on the rail

and end frame.

Large end

4-2. Engage the rail clamps on rail (2) and rail (3) with

rail (1) and rail (4) respectively.

YM-5100A Only

4-3. Secure the resonators by fitting their hooks to the

rail clamps engaged in Step 4-2.

* Hooks are provided at 2 locations both on the natu-

ral tone side and the accidental tone side.

* Make sure that each hook is securely fitted.

Rail (4)

Rail clamp

Rail (1)

Hook

ASSEMBLY

Rail (1)

Small end

Rail (2)