Yamaha YM-4600A 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Yamaha YM-4600A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YM-4600A 14 페이지. Concert marimbas
Yamaha YM-4600A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

Please read the following instructions carefully before using your marimbas.

◆ Installation Location

Use or storage in the following locations may cause damage, even when packaged.

• In direct sunlight, such as near a window, or in a closed vehicle in daytime.

• Near heating devices or in other locations subject to excessive heat.

• In excessively cold environment.

• In places with excessive humidity or dust.

• Locations subject to vibrations.

◆ Handling

• Never place an object on or lean against the instrument, as this may cause damage to the tone bars and frame

parts or topple the instrument, which is extremely dangerous.

• Do not use hand orchestra bell mallets or other hard objects on your marimbas. The resulting dents or scratches in

the tone bars could impair the sound.

◆ Moving and Transporting the Instrument

• Before moving the instrument, make sure that the caster brakes are released. Also make sure to lift the instrument

slightly when moving over rough surfaces.

• When the instrument must be transported to a different location, disassemble it to the same state as when it was

purchased (See page 22.), taking care to pack each component properly. Disassembly steps are in the opposite

order of assembly.

◆ When Not in Use

• Always engage the caster brakes.

◆ Maintenance

• The tone bars should be polished from time to time using a soft and dry cloth or silicone cloth. Stains that cannot be

removed with a dry cloth may be wiped off using a small amount of ethyl alcohol. Never use thinner or benzene or

a wet cloth for cleaning purplses.

◆ Keep This Manual for Future Reference

• After reading, make sure to keep the manual in a safe place.

PRECAUTIONS

• When assembling/disassembling the instrument, do so with at least two

persons and follow the instructions outlined in this manual. Assembly in

the wrong order can cause the pipes to drop which may result in an

injury, impair the performance functionality of the instrument or cause

noise.

• After final adjustment of the legs the fixing screws must be tightened

securely to prevent loosening. Looseness may cause the instrument to

shift during performance and can also cause noise and other problems.

Retighten the screws from time to time.

Assembly Cautions