Yamaha YM-4900A 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Yamaha YM-4900A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YM-4900A 14 페이지. Concert marimbas
Yamaha YM-4900A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

ASSEMBLY

1-2. Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the

reinforcement stays and tighten the fixing bolt securely.

1-3. Install the reinforcement stay to the large end leg.

Insert the "E" marked end of the reinforcement stay (with its slant shaft facing down) into the joint

(marked with "E") on the large end leg until it stops and tighten the fixing bolt securely.

In the same way, install the reinforcement stay to the small end leg. (There is no marking on the

small end joint.)

Leg (Large end)

1-4. After making sure that both legs are perpendicular to the floor, fit the end of each slant shaft to the

wing nut located in the lower part of each leg and tighten it securely.

* Make sure that the slant shaft is securely fitted.

Reinforcement stay

(Large end)

Leg (Large end)

Screw hole

Reinforcement stay (Large end)

Fixing bolt

Slant shaft

Wing nut

Reinforcement stay

(Small end)