Yamaha YM-6100 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Yamaha YM-6100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha YM-6100 17 페이지. Concert marimba

페이지 인쇄

Please read the following instructions carefully before using your marimbas.

◆ Installation Location

Use or storage in the following locations may cause damage,

even when packaged.

• In direct sunlight, such as near a window, or in a closed

vehicle in daytime.

• Near heating devices or in other locations subject to ex-

cessive heat.

• In excessively cold environment.

• In places with excessive humidity or dust.

• Locations subject to vibrations.

◆ Handling

• Never place an object on or lean against the instrument, as

this may cause damage to the tone bars and frame parts or

topple the instrument, which is extremely dangerous.

• Do not use hand orchestra bell mallets or other hard objects

on your marimbas. The resulting dents or scratches in the

tone bars could impair the sound. Also avoid hitting the tone

bars hard with a hard mallet. The tone bars can crack.

◆ Moving and Transporting the Instrument

• Before moving the instrument, make sure that the caster

brakes are released. Also make sure to lift the instrument

slightly when moving over rough surfaces.

• When the instrument must be transported to a different lo-

cation, disassemble it to the same state as when it was

purchased, taking care to pack each component properly.

Disassembly steps are in the opposite order of assembly.

Cautions

◆ When Not in Use

• Always engage the caster brakes.

◆ Maintenance

• The tone bars should be polished from time to time using a

soft and dry cloth or silicone cloth. Stains that cannot be

removed with a dry cloth may be wiped off using a small

amount of ethyl alcohol. Never use thinner or benzene or a

wet cloth for cleaning purplses.

◆ Keep This Manual for Future Reference

• After reading, make sure to keep the manual in a safe place.

• When assembling/disassembling the instrument, do

so with at least two persons and follow the instructions

outlined in this manual. Assembly in the wrong order

can cause the pipes to drop which may result in an

injury, impair the performance functionality of the in-

strument or cause noise.

• After final adjustment of the legs the fixing screws

must be tightened securely to prevent loosening.

Looseness may cause the instrument to shift during

performance and can also cause noise and other prob-

lems. Retighten the screws from time to time.

Assembly Cautions